Introduction: Tracking Device

Picture of Tracking Device

In these two videos we will be looking at how to make a cellular enabled tracking device that you can add a simple LIPO battery to and make a mobile james bond style tracking device.

Step 1: Tracking Device - Hardware Configuration

This is the first of a series of videos for the James Bond Tracking Device we are going to be building. I will show you the hardware in this video how to connect all the devices as well as some tips.

Here are some links for all the hardware devices:

ultimate gps http://www.adafruit.com/products/746

Fona http://www.adafruit.com/products/1963

Fona + GPS http://www.adafruit.com/products/1963

Check out part 2 Software https://www.youtube.com/watch?v=5MZE2... ---------------------------------------------------------------------

Support the channel tip with bitcoins Address: 1MvcZHRbDm9czS8s776iutBBPJ39K4PEHh

Follow me on youtube http://www.youtube.com/misperry

Follow me on Twitter http://www.twitter.com/misperryee

T-Shirts http://www.zazzle.com/misperry

Step 2: Tracking Device - Software Configuration

In this video we will be looking at the software that will go with our tracking device. This software is written for the arduino. I have included some helpful links below.

GPS Library form Adafruit https://github.com/adafruit/Adafruit-...

Fona Library from Adafruit https://github.com/adafruit/Adafruit_...

Checkout Part 1 Hardware for Connection Information https://www.youtube.com/watch?v=I6ETa...

--------------------------------------------------------------------------------------

Support the channel tip with bitcoins Address: 1MvcZHRbDm9czS8s776iutBBPJ39K4PEHh

Follow me on youtube http://www.youtube.com/misperry

Follow me on Twitter http://www.twitter.com/misperryee

T-Shirts http://www.zazzle.com/misperry

Comments

About This Instructable

2,504views

44favorites

License:

More by misperry:Adding Microsoft Cortana to Raspberry PiHomeAssistant - Custom WiFi Enabled GPIOHosting Https for AlexaPi Custom Skill
Add instructable to: