Print PDF
Favorite
Email
Step 5Feet
I used 3/8" threaded rod for the feet. It comes in 36" lengths, so I cut it into fourths, each 9" long.
Flip the cone upside down and rest it on sawhorses or similar. Put the base plate on and line it up, then scribe through the holes in the corners onto the cone. Drill the cone out in each corner.
Flip the cone upside down and rest it on sawhorses or similar. Put the base plate on and line it up, then scribe through the holes in the corners onto the cone. Drill the cone out in each corner.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
