Introduction: Transfer a Photo to a Tape With an Inkjet Printer

Transfer a photo to a tape with an inkjet printer

Step 1: Step 1

Take a transparent smooth, not matted document pocket.

Step 2: Step 2

Trim the ribbon from side to folder

Step 3: Step 3

Put the pocket in the printer with the lower layer where it does not dissolve.

Step 4: Step 4

You run the printer to print, but you choose to print on photo paper.

Step 5: Step 5

Once the photo is printed, carefully stick the tape onto it and press it tight.

Step 6: Step 6

Then carefully remove the tape and glue it wherever you choose.

(You can also cut the piece with a picture with your pocket so as not to risk a bad transfer due to peeling)


seamster (author)2017-07-18

Looks good! Thanks for sharing the details of the process :)

About This Instructable




More by batvanio:Transfer a Photo to a Tape With an Inkjet PrinterRecycled Bottle
Add instructable to: