With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
R/C DODGE XBOX How 2 build your Xbox into this remote control dodge magnum R/C car with tv and sound. visit www.mlomd.com for more inf...
PARTS LIST - MICROSOFT XBOX. - DODGE R/C 1/6 SCALE MAGNUM jada toys. - 4 WIRELESS CONTROLLERS. - SOLDERING GUN. - 4 80MM FANS WITH LEDS. - DREM...
TAKING APART THE CAR -Turn the car over laying it on a soft clean cloth. - Unscrew all 8 Phillips screws - And 4 around the bumper - Slowly separate...
Top and Bottom - Undo all wires from the cars motherboard. - Now you have 2 separate pieces. - The top will hold the xbox - The bottom will have all t...
Cutting back window - Unscrew the back window from inside. - Then dremel it out along the factory lines. - And epoxy the dvd tray door when done.
THE BOTTOM - The care comes with mp3 compartment . - You will need to move the cars pc board forward. - Extend some wires solder the connections and ...
POWER AND EJECT - Unscrew the back plate from the inside of the car and dremel out holes - You will need to extend the power and eject button 1 foot....
The Top - The top of the car will hold the xbox. - There are stock supports that will hold the back of the dvd drive. - The front of the dvd drive wi...
Inside dvd support - You will use the cars stock support for the rear of the dvd. - Some trimming of the plastic support - To get the dvd drive to fi...
Inside motherboard - Some motherboards are different than others placement is key. - You will have to extend the dvd yellow wires 1 foot. - Cut the w...
Power supply - Epoxy the power supply to stock supports. - Dremel out a hole for the power supply to come out. - Use the spot where the car trunk han...
Add the a/v plugs - Drill out 3 holes for audio and video plugs. - Use screw type rca female to female connectors. - Add you’re a/v Y adapter inside ...
CUT OUT HOOD Very Carefully dremel out a square in the hood for the tv.
Wireless controllers - Add any 4 wireless controllers . - Logic tech are the best. - epoxy the wireless receivers to the inside of the windshield.
Add hd activity - Flip over the motherboard and solder the - to this spot - Solder the + to any 5v source or 12v - depending on your leds. - You can a...
PUT IT ALL BACK TOGETHER.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »