Print PDF
Favorite
Email
Step 5Transform It!
Instead of finishing the Large Box, I am going to show you, in detail, how I reassembled some of the parts into a Small Box for smaller subjects.
First, I removed all of the "halves" sections from the finished Large Box. I left the Elbow Joints ("Part A") ends on. Next, I created a smaller box using just the "halves" sections and Elbow Joints. Look closely at the pictures below for references.
Notice how my box isn't quite square? This is because I didn't cut one of the 2ft pipes exactly in half, leaving me with 2 different-sized "halves" to work with. This doesn't affect the function at all.
First, I removed all of the "halves" sections from the finished Large Box. I left the Elbow Joints ("Part A") ends on. Next, I created a smaller box using just the "halves" sections and Elbow Joints. Look closely at the pictures below for references.
Notice how my box isn't quite square? This is because I didn't cut one of the 2ft pipes exactly in half, leaving me with 2 different-sized "halves" to work with. This doesn't affect the function at all.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
