With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Recently had my uncle on the riding mower and he hit a branch that slid up into the transmission belt. It got lodged in between and somehow popped the...
Step 1: Turn off the tractor (Duh), Place the PTO lever to “OFF” position. Move the tractor to a level spot, with plenty of clearance on both sides. ...
Step 2: On a level surface, raise and block the tractor SAFELY! This is the most critical step of this procedure, as you will be using tools that wil...
Step 3: Get the impact wrench out and I believe it was a 16mm IMPACT socket, emphasis on IMPACT socket. Don’t use a regular socket, it may break send...
Step 4: Take note of the path the belt takes before you remove it. To get the belt off of one of the idler pulleys, you'll have to remove a small bol...
The transmission pulley has a guard all the way around it. You have to remove the pulley and lift it up, to clear the guard. I had to do this anyway, ...
Start the new belt on the engine pulley. Route it over the steering gear towards the rear of the tractor. Install the engine pulley, and hand tighten ...
Route the belt around the transmission pulley and install the pulley and fan back onto the transmission. You’ll have to set the parking brake / cruise...
Torque the nut on the transmission pulley down. I’m going to be honest, I have no idea what the torque spec is, so I just got it on there as tight as ...
Step 9: Reinstall the small idler pulley bolt that was removed. Step 10: Reinstall the mower deck. Step 11: Reinstall the engine pulley guard. Step...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »