Introduction: Tri-pod for Sony Handycam
This is my first instructable so go easy on me
This is a stand for a sony handycam made out of knex. It is a table top tri-pod
Step 1: The Base
Build this
you need:
1 blue connector
1 purple connector
3 gray connectors
3 gray rods
Step 2: Building Up!
Build This
You need:
4 white connectors
2 red connectors
2 yellow connectors
4 red rods
2 white rods
2 green rods
Step 3: This Too!
Build This
You Need:
3 white connectors
1blue connector
1 purple connector
3 white rods
3 yellow rods
2 gray rods
1 blue rod
Step 4: Almost Done
Build This
You need:
6 yellow connectors
2 red connectors
1 white connector
3 Blue rods
2 gray rods
2 white rods
1 red rod
1 yellow rod
Step 5: Slap 'Em Together and Your Done!
put these parts together