Instructables
Picture of Triple Single Pandam Braclet
Is a rubber band bracelet from rainbow loom and is fun to make!!!
 
Remove these adsRemove these ads by Signing Up

Step 1: Supplies

Picture of Supplies
You need rubber bands the loom, 1c clip and the hook

Step 2: Assembly

Picture of Assembly
Start by putting the rubber bands on the loom in a row with the red arrow facing up

Step 3: Triangles

Picture of Triangles
Take more rubber bands and make upside down triangles

Step 4: Hooking

Picture of Hooking
Hook the rubber bands like you would do in the original rainbow loom bracelet also turn the loom around

Step 5: Connecting

Picture of Connecting
13, 6:30 PM.jpg
Take the top rubber bands and connect to the top rubber band

Step 6: Pullllll

Picture of Pullllll
Pull the bracelet of the loom and onto the hook

Step 7: Longer

Picture of Longer
Since the bracelet is to short you line the rubber bands like you did in step 2

Step 8: Hooking2

Picture of Hooking2
Now flip the loom upside down and connect the bracelet to the existent ion and hook

Step 9: Final Step

Picture of Final Step
13, 6:30 PM.jpg
Now remove and attach with a C clip and your done

it DOESNT! work do more writing how do u make the big triangle at the top

ducttapestuff3 months ago
I wasn't trying to be creepy or anything, I just wondered. I'm 11.
ducttapestuff3 months ago
How old are you? :)
lilsailor (author) 6 months ago
Try again
rroland18 months ago
this sucks it don't work
TheDoctor1111 months ago
You said -the- twice on step 5