Print PDF
Favorite
Email
Step 2Lay them out and cut as needed
As mentioned before, we were lucky in that one full unit fit right against the long wall, and one half unit, cut just below the built in shelf fit perfectly against the shorter wall. I had the top of each unit be the end because it looked a little nicer that way.
You can buy extra shelves for these. Because these Trofasts are intended to be upright, the add-on shelves just come with the little flat things that they rest on, so I had to use some screws to secure them. The shelves also have notched areas where the mounts are intended to go: I just left these as is. They aren't that noticable once you paint and put the baskets into the cubbies.
You can buy extra shelves for these. Because these Trofasts are intended to be upright, the add-on shelves just come with the little flat things that they rest on, so I had to use some screws to secure them. The shelves also have notched areas where the mounts are intended to go: I just left these as is. They aren't that noticable once you paint and put the baskets into the cubbies.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
