Print PDF
Favorite
Email
Step 2Rear Beam
The Rear Beam is made from two different size square box section construction steel. Purchased in 4' sections the larger 1 1/2 " box section is cut into (2) 2' lengths.
The smaller 1 1/4" box section is the center portion of the beam and is uncut
The two larger box section pieces are telescoped over each end of the smaller box section piece.
The now 3 piece assembly is extended to the width of the truck bed and the Eye Bolts of Step 5 are put through aligned holes in the three sections to hold the beam's length in this case 5' 4 1/2".
The smaller 1 1/4" box section is the center portion of the beam and is uncut
The two larger box section pieces are telescoped over each end of the smaller box section piece.
The now 3 piece assembly is extended to the width of the truck bed and the Eye Bolts of Step 5 are put through aligned holes in the three sections to hold the beam's length in this case 5' 4 1/2".
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
