Print PDF
Favorite
Email
Step 8Front Tire Guides
Tire Guides are used on both the Front Beam and the Upper beam to control the front tire of the bike.
The Tire Guides are cyclone fence gate hinge hardware. One is required for each side of the tire.
1. Slide the fence gate hardware on the Front Beam fence post.
2. Position them on either side of the tire and tighten.
The gap between each guide will vary depending on the specific width of each bike's tire.
The second and third picture shows the same tire guides on the upper beam holding the back of the front wheel.
The Tire Guides are cyclone fence gate hinge hardware. One is required for each side of the tire.
1. Slide the fence gate hardware on the Front Beam fence post.
2. Position them on either side of the tire and tighten.
The gap between each guide will vary depending on the specific width of each bike's tire.
The second and third picture shows the same tire guides on the upper beam holding the back of the front wheel.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
