Step 1: Building the Ram ,Trigger,and Handle
2.) Build the trigger.
3.) and 4.) Build ram. Four is just a side view.
Step 2: Building and Connecting the Body and Barrel.
2.) Build the two pieces of the barrel, you will connect in the next picture.
3.) As I said connect the barrel as shown.
4.) Now connect the barrel to the body. Pay close attention to which part of the body goes on which side.
Step 3: Adding Rubber Bands.
HOW TO SHOOT:
To shoot this gun all you do is put your on the red and yellow pieces of the ram and pull back until you see or hear the block move down. Now load a round in the barrel and pull the trigger.
(I am not held reliable for misuse or injury from this gun.)
THANKS FOR BUILDING!!! :D