Introduction: True Trigger Knex Gun W/ Magazine
This is my second instructable. :D
Stats
- Fires yellow rods
- 6-7 rod jamproof mag
- True trigger
- Ram lock
- Average range (Depends on rubber bands)
I give credit to Hu Are You for helping me construct this gun.
Enjoy!
Step 1: The Barrel
The barrel of the gun. This part should be easy enough to build with the pictures.
1. Top view
2. Side view
3. Other side view
4. Bottom view
Step 2: The Handle
This is the handle of the gun.
1. Front view
2. Side view
3. Back view
4. Other side view
5. Top view
6. Bottom view
Step 3: The Trigger
The trigger of the gun.
1. Top view
2. Side view
3. Other side view
4. Second part top view
Step 4: Ramrod
Not much to say, is there...?
Step 5: Magazine
Yet another excessively simple step...
Step 6: Putting It All Together
Finally!
1. Attach magazine to barrel
2. Attach trigger (part 2)to barrel
3. Attach ramrod to barrel using beige piece
4. Attach trigger (part 1) to trigger (part 2)
5. Add blue spacer to end of barrel
6. Attach handle to barrel
7. Another pic of handle attachment
8. Attach trigger (part 1) to handle
9. Other side
Step 7: FINISHED!!!
Feel free to tinker and mod as you wish...
Rubber bands can be placed pretty much anywhere, but I recommend these placements.