This is a true semi auto gun. It's has four shots and, well,I guess a true trigger. (It's a gear.) Anyway this has a very comfortable handle and stock. I think this is the first gun of it's kind. I hope you enjoy this gun as much as I do. If you need any pics leave a massage. Enjoy. :D
76 small green
26 gray single
12 gray double
8 blue 3D
6 purple 3D
I may be off by a piece or two so don't yell at me. Please. :D
Step 1: The Gear Housing and Body.
1 What you will be building.
2 Front view.
3 Top rear view.
4 Rear view.
5 Right side view.
6 First picture but add the red gear.
7 Reverse side of picture six.
8 Second thing you will need to build.
9 Front side view.
10 Bottom rear view.
Step 2: Building the Stock.
1 Build this.
2 Also build this.
3 Connect the two objects as shown.
4 Build the end of the stock.
5 Another view.
6 Connect it all.
Step 3: Building and Connecting the Handle.
1 Build the two handle pieces.
2 Connect those pieces as shown.
3 Attach the stock and the handle.
Step 4: The Guns.
1 Build four of these. You can add more if you wish.
2 Connect those guns to two circle connectors with Y connectors on them.
Step 5: Building the Gatling Housing.
1 Build the top part of the gatling housing. Most of the pieces are for detail so it's OK to miss a few pieces if needed.
2 Another view of the top housing.
3 A top view of the top housing.
4,5 and 6 Bottom housings.
7 Rear view of the gatling holder. (build this)
8 Side view of the above comment.
9 and 10 Connect the housing pieces together. You are almost done! :D
Step 6: Finishing up.
Connect the gatling housing to the rest of the gun. Slip in a gray rod and connect it to the other gray rod coming from the gun with an orange connector. Slip some tan connectors into place to hold the gatling to the rod and you are done!!! I hope you have enjoied making this and if you need any help or pics leave a comment. Thank You!!!