Introduction: Truly Semi-auto Revolver

Picture of Truly Semi-auto Revolver

 Hi all. This is my new semi automatic k'nex revolver. I have searched instructables for days and I have found no gun like this. Hope you enjoy.
Don't forget to rate and subscribe!
 
Pros:
Semi automatic
8 shot
comfy
decent power (for a semi auto gun) 15-20ft. Sometimes it only goes about 10ft but that doesn't happen often.
Removable mag
Reliable
Looks pretty cool
 
Cons:
Slowish reloading
quite difficult to pull the trigger as this is where the power comes from.
Some modded pieces.
 
I did try to upload a video of the gun in action but I tried everything and it wouldn't upload. Sorry.










Step 1: Barrel/mag

Picture of Barrel/mag

1. This is what you will make.
2. Make
3. Make
4. Add
5. Add
6. Add
7. Add
8. Add
9. Add (Do process 3-9 8 times)
10. Make x2
11. Do
12. Do
13. Finish
 
If you have enough k'nex you can make several of these so you have a few removable mags!

Step 2: Handle

Picture of Handle
  1. This is what you will make
  2. Make x2
  3. Add
  4. Make x4
  5. Attach
  6. Attach
  7. Make x4
  8. Attach
  9. Attach
  10. Attach

Step 3: Back End of Body

Picture of Back End of Body
  1. This is what you will make.
  2. Make x2
  3. Get
  4. Do
  5. Attach
  6. Attach

Step 4: Ammo Stopper

Picture of Ammo Stopper
  1. What you will make
  2. Make
  3. Make (wrap some tape around the end) This is essential
  4. Attach
  5. Another angle
  6. Attach
  7. Attach

Step 5: Hammer

Picture of Hammer
  1. What you will make
  2. Make x2
  3. Do x2
  4. Do x2
  5. Make
  6. Attach
  7. Attach
  8. Attach
  9. Add
  10. Do

Don't add the washers to the hammer!

Step 6: Trigger

Picture of Trigger
  1. What you will make
  2. Make
  3. Make
  4. Attach
  5. Add
  6. Attach
  7. Add
  8. Attach
  9. Add 

Step 7: Front of Body

Picture of Front of Body
  1. What you will make
  2. Make x2
  3. Make
  4. Attach
  5. Attach
  6. Attach trigger
  7. Another angle
  8. Another angle
  9. Finished

Step 8: Putting It Together

Picture of Putting It Together
  1. Get
  2. Attach
  3. Get
  4. Attach
  5. Get
  6. Attach
  7. Attach hammer
  8. Another angle (Switch the tan clip on to the other side)-essential
  9. Get
  10. Attach
  11. Another angle

Step 9: Elastic Bands

Picture of Elastic Bands
  1. Get
  2. Attach
  3. Another angle
  4. Another angle
  5. Get
  6. Do
  7. Another angle
  8. Another angle
  9. Get
  10. Do
  11. Attach
  12. Attach
  13. Finished

Comments

Dragonfly7 (author)2011-10-02

How does the Revolver turn?

K'nex_Freak (author)Dragonfly72012-08-10

elastic band

Oicu81shoe (author)2011-08-12

Great gun! Didn't really like the trigger so I just used the hammer instead you might also want to have a disclaimer in case somebody shoots their eye out.

DJ Radio (author)2011-08-11

Nowhere near first, and the trigger needs a better placement. Nice try though.

beanieostrich (author)2011-08-11

This is cool =D For my preference the trigger could be a little further back, but its still very good.

~KGB~ (author)2011-08-11

Nice! check out oodas on KI.

Football viking boy (author)2011-08-11

WASP still best semi gun so far

apples!!!!! (author)2011-08-11

Well loosewire posted one a while back and had the idea floating around for three years or so, so it's not the first :P however, good job nonetheless!

About This Instructable

2,394views

6favorites

License:

Bio: nothing much really.
More by K'nex_Freak:*NEW* AUTO LOADER KNEX MAGTruly semi-auto revolverK'nex Arcade Coin Pusher instructable
Add instructable to: