Print PDF
Favorite
Email
Step 2Prepare Your Pallets
I have chosen to cut my pallets in half and remove unnecessary support slats. Please be more cautious with your use of a table saw than I was! Here's how I did this:
1. Cut your pallets in half. My 10" table saw cut deep enough to separate the halves on most sections, and I finished the others with the saw-zall.
2. Cut the middle support with the saw-zall, making sure the separated halves don't land on your foot.
3. Remove unnecessary wood from the side of the pallet that looks like a picket fence. Save these: you'll use them in the next step
1. Cut your pallets in half. My 10" table saw cut deep enough to separate the halves on most sections, and I finished the others with the saw-zall.
2. Cut the middle support with the saw-zall, making sure the separated halves don't land on your foot.
3. Remove unnecessary wood from the side of the pallet that looks like a picket fence. Save these: you'll use them in the next step
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
