I took a piece of pine and turned a Christmas tree, using a parting tool, spindle gouge and a skew.

I then sanded through 80 ,12 , 320, 600 grit then finished it with teak oil. then added a screw eye so it can be hanged on a christmas tree ! you could easily paint this with different colours to produce a different looking tree :) if you me one please tweet me on twitter @Tomhowbridge or send me an email.

Step 1: Watch the Video !

<p>Awesome lathe project.</p>
<p>Thanks !</p>

About This Instructable




More by Tom Howbridge:Build Harley Quinns Hammer From Suicide Squad Build your own simple IronMan Arc reactor Mini Engineers Square From Steel Angle  
Add instructable to: