Don't you wish you had a system that could play all your favorite games from the past? Mario? Sonic? Gauntlet? Yes!
Well with this magic system you can play all your favorites on a 4-player system that uses authentic Super Nintendo Control Pads. It has the capability to play games from NES, Super NES, N64, Neo Geo, Gameboy Advance, Commodore 64, Sega Genesis, arcade games and more! It is cartridge free, and plugs into any TV with HDMI. Take it to any friends house, because this puppy is very portable! The secret is there is a mini computer inside of the Super NES that runs whatever classic games you choose.
I started with just an old Super Nintendo, and with about $200 and some time on my hands, I was able to turn it into pure gaming gold. You can do the same thing as well, just follow this instructable!
This console is:
• 4 player and super portable - have a gaming party at anyone's house!
• Cheap to build
• Able to use authentic SNES controllers (4 player with additional wireless controllers.)
• Solid State, no moving parts
• Cartridge-free! Store all your games on a SD card.
• Can be used in Modern TV's even if your real Nintendo is cannot be accepted by your TV.
• Going to make all your friends jealous ^_^
Check out a demo of the player right here:
The emulators I use are all 100% free. Keep in mind if you build your own player, it should be used for games that you legally own.
Well with this magic system you can play all your favorites on a 4-player system that uses authentic Super Nintendo Control Pads. It has the capability to play games from NES, Super NES, N64, Neo Geo, Gameboy Advance, Commodore 64, Sega Genesis, arcade games and more! It is cartridge free, and plugs into any TV with HDMI. Take it to any friends house, because this puppy is very portable! The secret is there is a mini computer inside of the Super NES that runs whatever classic games you choose.
I started with just an old Super Nintendo, and with about $200 and some time on my hands, I was able to turn it into pure gaming gold. You can do the same thing as well, just follow this instructable!
This console is:
• 4 player and super portable - have a gaming party at anyone's house!
• Cheap to build
• Able to use authentic SNES controllers (4 player with additional wireless controllers.)
• Solid State, no moving parts
• Cartridge-free! Store all your games on a SD card.
• Can be used in Modern TV's even if your real Nintendo is cannot be accepted by your TV.
• Going to make all your friends jealous ^_^
Check out a demo of the player right here:
The emulators I use are all 100% free. Keep in mind if you build your own player, it should be used for games that you legally own.
Remove these ads by
Signing UpStep 1: Everything You Will Need
OK, before we begin, there are a few basic skills you need to complete this project:
• Basic soldering skills
• A bit of computer know-how (Installing operating systems, emulators, tweaking computer settings)
• Some Mechanical know-how as well (Putting together computer components)
Here are the tools you will need
• Screwdriver set
• Glue gun
• Soldering gun, solder removal gun
• A thin 4mm socket (for removing those pesky Nintendo screws)
• A cresent cutter.
• SD Card Reader
• Keyboard and Mouse
Here is the parts you will need, see the photo for details on each item below:
• An old Super Nintendo with controllers
• A mini ITX Motherboard with processor (Must have HDMI output, have an external power supply, and must be no more than 4 cm high) I personally used a ZOTAC IONITX-C-U. The nice thing about the Zotac is that it does not get hot enough to need a cooling fan.
• Stick of RAM for the computer
• SD Card SATA Solid State Hard Drive
• 16 GB SD Card (goes in the solid state drive)
• USB Super NES dual port controller adaptor
• HDMI Cable and HDMI adaptors
• 2 Cherry microswitches
• Some standard internal computer cables
• Some wire and solder
• (Optional) 1 or 2 wireless dual shock style controllers if you want 3-4 players (These are also needed to play N64 games)
• Speaker grating for cool ventilation.
• 4 philips head 1/2 inch machinery screws for putting everything together.
• Windows XP or other operating system
• Basic soldering skills
• A bit of computer know-how (Installing operating systems, emulators, tweaking computer settings)
• Some Mechanical know-how as well (Putting together computer components)
Here are the tools you will need
• Screwdriver set
• Glue gun
• Soldering gun, solder removal gun
• A thin 4mm socket (for removing those pesky Nintendo screws)
• A cresent cutter.
• SD Card Reader
• Keyboard and Mouse
Here is the parts you will need, see the photo for details on each item below:
• An old Super Nintendo with controllers
• A mini ITX Motherboard with processor (Must have HDMI output, have an external power supply, and must be no more than 4 cm high) I personally used a ZOTAC IONITX-C-U. The nice thing about the Zotac is that it does not get hot enough to need a cooling fan.
• Stick of RAM for the computer
• SD Card SATA Solid State Hard Drive
• 16 GB SD Card (goes in the solid state drive)
• USB Super NES dual port controller adaptor
• HDMI Cable and HDMI adaptors
• 2 Cherry microswitches
• Some standard internal computer cables
• Some wire and solder
• (Optional) 1 or 2 wireless dual shock style controllers if you want 3-4 players (These are also needed to play N64 games)
• Speaker grating for cool ventilation.
• 4 philips head 1/2 inch machinery screws for putting everything together.
• Windows XP or other operating system
Visit Our Store »
Go Pro Today »
is there enough room for a ssd where your sd to sata adaptor is?
it seems to be quite hard to find mobo's with a cpu and psu for $100 right now...
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157228
Is the one I am looking at using for my version of this.
Another great site, albeit UK based, is http://www.mini-itx.com/store/boards
They have boards, accessories, and even 12VDC PSU
Keep Rockin' dude!, thumbs up!
I call bullshit
there is only 1.38mb on my sd card now???HELP???
On another note, could you use the original power switch of the snes? If not, is it a matter of space, or compatibility?
As far as the switches go, I could not use the power switch because it was a hard on off switch. Computers generally use a momentary push switch for their power button. The reset switch on the Super NES is a momentary switch, so I probably could have used that though. I am guessing that just about any switch that springs back to the off position should work.
do i do it on the snes or my pc?
Do you think it's possible to do the mod with a PAL console also?
I believe that a PAL console could possibly work, they were similiar size consoles. I think the US Super NES was a tad taller with it's "hump" in the middle though. I didn't make much use of this area, but certain motherboards have a taller heatsink that could possibly need that clearance.
Sorry about the slow reply, I haven't been around computers much these days. Yes, dos box should run fine with this sort of setup. The only downside is many dos games might have a hard time mapping to a joypad. You can always work around this by using a program like xpadder or joy2key that will turn gamepad controls into keyboard strokes. xpadder also maps mouse controls as well I believe.
RAM chips are basically over flow for a computer's hard drive. RAM chips provide extra memory (Which is mostly temporary) that helps relieve your hard drive's workload when you have a whole bunch of windows open at the same time. The extra memory makes your computerr run faster and allows you to run more windows at the same time without having your computer poot out.
Ram is what makes machines run fast, by accessing memory from the stick; it can load a saved file.
It's not a USB type of stick, it's more like a microchip. Buy one on Ebay or something,
And then you run a emulator on it
Am i right?
WITH THE SD CARD
links???
I WANNA MAKE THIS BUT THERE ISNT ENOUGH DETAILS