Print PDF
Favorite
Email
Step 4Add Switches and Vents, and Hard Drive
Now it is time to add those little things that are necessary before we start mounting in the guts.
1) Solder the microswitches to computer case powering wires, then hot glue the switches on the top of the case as pictured above.
2) Cut the speaker grating to the shape of the holes on the top of the case. Hot clue the grating right onto the case.
3) Hot glue the Hard drive to the top of the case as well. It is light and will not move.
1) Solder the microswitches to computer case powering wires, then hot glue the switches on the top of the case as pictured above.
2) Cut the speaker grating to the shape of the holes on the top of the case. Hot clue the grating right onto the case.
3) Hot glue the Hard drive to the top of the case as well. It is light and will not move.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
