Tv-B-Gone Hat

Step 5 Attach the Circuitry to the Hat

You can really put this wherever you want but the underside of the bill seemed like the most appealing place. Sewing through the bill of a hat sucks but it works, attach the ground from the 555 to the Tv-B-Gone ground and connect the outputs from the relay to opposite sides of the push switch. Next run the wire from pin 8 of the 555 (+) and the 6v supply from the Tv-B-Gone to one slide switch and the remaining two leads from the push button switch to the second slide switch. Finally connect the three IR LED's in series to the LED output on the Tv-B-Gone. Thats it. Done.