Picture of Mold Making: Two Part Silicone Mold

*UPDATE* I'm going to include some FAQ's to answer some of the questions I've received. { FAQ }

This tutorial will demonstrate how to reliably reproduce cast objects using a two part silicone mold. This technique, when skillfully applied, can have incredible resolution, effectively cast very complex shapes, and can yield parts that need little cleanup. This type of mold is most useful for parts that are fairly small, and therefore will not consume a massive amount of silicone to cast. To save material on large castings, techniques such as glove molding and matrix molding are often applied.
Remove these adsRemove these ads by Signing Up

Step 1: Select, clean, and add sprue

Picture of Select, clean, and add sprue
I chose a figurine from a comic shop as my demo to mold. This will be what is called the master. It has a fair amount of surface detail, and some small parts that, although tricky, are faithfully reproduced in the final casting.

Begin by inspecting, cleaning, and securing your model. I glued down the small parts that my figurine came with which originally snapped together. I took a cotton swab and got out all the grit and dust from every tiny crevice. Remember that everything you see on your part will be cast into the mold, even down to fingerprints. You will not be able to correct these mistakes once the part is cast, so take the time to do it right.

You will need to create a sprue or sprues on your part. These will become funnel shaped holes in the mold. You need them so you can get your casting material into the mold so don't forget to put them in. I usually use the tops to bottles or machine my own, but you can make most any tube or funnel shaped object work. If you'd like, you can even make your sprue out of clay. I usually smooth the seam in between the sprue and the master as to not catch bubbles on the very bottom of the part. Try to think ahead when you're molding a part, if something looks like it will trap bubbles, try to orient things to avoid it. Your goal is to create a mold that will produce the best quality parts with the least amount of work and fiddling.
1-40 of 88Next »
gekitsuu2 months ago

I have Smooth-on Dragon Skin silicone and there is a warning about proper ventilation on the box. I live in an apartment and I don't have access to a workshop so I was wondering, how dangerous is it to work with small batches in an apartment? Should I only do it when I can leave the window open and have a fan blowing the fumes outside?

can you use it to mold metal

JamesS133 months ago

Hmm, I wish i would have read this prior to making my mold. I just went on instinct and everything came out near perfect as per your method, except i used old legos as my box. Well almost everything. . . I now am the owner of 4 blocks of silicone and toy prizes inside. I learned the hard way that you have to apply the sealant as silicone adheres perfectly to itself, even if the first half of the mold is fully cured after 2 days. Good news is when i do this a second time, i can reuse the cured silicone in the new mold and save a ton of volume of raw materials.

arjunmenon4 months ago


If possible please tell me, if the same procedure applies while using PC-ABS granules to create designs. Will it require the same silicone mould?

The product which I want to build is a pair of headphones.


How do you make the item you pour hollow? for instance if you want to mold a doll head complete with the holes to put hair into the head, etc?

Anaerian5 months ago

Is the clay you use just standard clay? I take it it isn't air drying or some such? And does it come away cleanly from the model?

bluebel954 years ago
Can I use it to make cakes or gummy candies? :)

If you use food grade silicon and a non-toxic release, I would say that it would be perfectly fine.

Corn starch is used for gummies. Just spread the powder into a tray, press your master into the it and pour slowly into each cast. This is the method used at a candy shop I worked at some time ago. Once set, dump the whole thing over a screen and reuse the powder.

Great tutorial ... I have a question about making another type of mold. We make wax fake food and use Silicone as our molding material. I'm having trouble making a mold for a pile of a serving of corn, or hash browns...something that doesn't ordinarily come in one piece but I want to make a one piece mold using real food. Any idea how to stick real food together to be molds together? Any advice would be greatly appreciated...thanks My Email addy is if you want to contact me more directly....

I recognize that robot from Giant Robo! Thats one of the rarer ones.

rverdi1 year ago
oh thank you! I've been on the hunt for 'how to make mold' tuts lately!
rachel of OddModicum
blayze1 year ago
So ive sculpted an animal type figure and ive ran into mold problems. I want my seam to bisect it so i lie it in the box sideways but it buries the legs in silicone and i cant figure out how to not destroy the mold to remove it. Anything will help. Thanks
wilvic2 years ago
..this is great tutorial..thank you for this..

..i have few questions sir, if I'm going to use RTV, would the process be different?

and for example I'll make a mold of something that i created, let say from modelling clay, would you please suggest how i can make a mold of that?
ramses6 years ago
I only wish you could cast aluminum in it...
FYI there are additives to resin to give a metal effect ("metal cold casts")
frollard ramses6 years ago
You can cast many low-melt alloys into silicone - it can withstand many hundred degrees celcius; it can do pewter, or lead no problem. Not sure about aluminium.
Seriously watch out for moisture and water if casting aluminium. Ensure the mould is totally dry, and above 100 C, before a steam explosion ruins your day. Silicone won't take that heat from liquid aluminium, though.
Silicone should work with low-melt alloys; tin, lead, pewter...not sure about aluminium... it can handle temps uip to 588Kelvin (600F) aluminium melts at ~933Kelvin - definitely not a good plan. Good thought on the steam/water. Dry the mold, and pour slowly :D
Stop posting spam. Seriously. The reason the last account was banned was because you are not welcome here. Eff off.
Hi frollard,we are biggiest manufaturer in China and we can teach you how to make a mold and provide you free samples for testing.Pls contact me 0086 13790224736 or
you could however take this mold pour melted wax in to it and make a wax master for lost wax casting. all you would have to do is add vents and set it in casting sand
Indeed - just wouldn't work for single-step processing. Damn I hate living in an apartment - i want so much to do so many...garage-y things.
Helos frollard6 years ago
I agree with you completely. I didn't realize until I moved into my own place just how necessary a yard and garage are. I also totally miss having a BBQ... Oh well, just plans for the future!
yea im kinda in the same position. i just made a vent hood and workbench in my place. not the safest idea but it works. i do small castings in the house.
that would be sweet
Rufo6 years ago
I have just made a rather complex mold of a sculpture I made in clay, the shell I made with plaster and it looked great, till I opened it and notice that the silicone was taky and stiky at some places... maybe the mixing went wrong is there something I can do, I can't afford to loose this mold... thanks
bofthem (author)  Rufo6 years ago
If your clay was plasticine, clasteline, or any other clay that contains sulfur you're pretty much screwed. The silicone has some cure inhibition when in contact with sulfurous material, meaning that it will only harden when it's removed from the clay and let rest with the mold open for anywhere from a few days to a few weeks. In the meantime, unfortunately, the mold will warp a little until everything cures. Depending on your model, this might not be an absolute disaster. There's a chance the silicone wasn't fully mixed, but that just puts you in the same situation. The only thing you can do to speed up the process is heat the silicone on a heating blanket or next to a radiator to get the catalyst to react faster. There's always a chance it just won't cure at all.
Hi dear friend,

Are you using RTV silicone for mold making?

We are biggest manufacturer of silicone rubber,we can provide you good quality with more cheap price and free samples for testing.

Pls reply me at :


Emphantasy Rufo5 years ago
 It also depends on what type of RTV silicone you used, tin or platinum.  Yes, products containing sulfur will inhibit platinum-based RTV, but I've yet to have that problem with tin, which cures against most anything.
Hi dear friend,

Are you using RTV silicone for mold making?

We are biggest manufacturer of silicone rubber,we can provide you good quality with more cheap price and free samples for testing.

Pls reply me at :


I'm looking to make soap molds and need a good supplier for the silicone, any suggestions?
Hi dear scottouradnik,

I know some good supplier who can provide good qulity with cheap price,hope can help you.Pls contact me
hello, we are a professional manufacturer silicone rubber, contact me at my email we can provide you most competitive silicone rubber to make molds for soap.
tinker2343 years ago
wow thanks
Sheilauva3 years ago
I am using window silicone, clear, sealant for my two part molds. I have not done this in 15 years and have forgotten what to use for a release, not for the clay, but for the seams around the clay. The silicone will stick to itself, so what do you use for the second half of the mold. Does this make sense?
Can I use canola spray on the silicone to release or vaseline, or do I have to buy a can of silicone release?
Traeh3 years ago
This is EXACTLY what I was looking for some small sculptures I wanted to cast in resin! Thank you for this awesome ible!!!
I have a pair of detailed flexible plastic wings that are curved. The wingspan is about 8 inches. Would this method work for them?
hello,this is Annie,you can contact with me more information about silicone rubber for making molds,
I would like to know about your offer " information about silicone rubber for making molds"

Hernando Delgado
1-40 of 88Next »