Instructables

Two-Tone Quilt Binding

Picture of Two-Tone Quilt Binding
An Instructable for people who already know how to put a binding on a quilt, but want to mix it up a bit. Sometimes your quilt needs one color binding on the front and another on the back - this will take care of it for you! Shouldn't cost any more than a regular binding.
 
Remove these adsRemove these ads by Signing Up

Step 1: Cutting your strips

Picture of Cutting your strips
Cut your binding strips as follows:

1" strip for the quilt top
2" strip for the quilt back

Join strips until they are long enough for all four sides of your quilt leaving an extra 12" for joining at the end.

Step 2: Sewing the strips together

Picture of Sewing the strips together
Sew the 1" and 2" strips right sides together using a 1/4" seam allowance.

Step 3: Pressing

Picture of Pressing
Press the seam allowance open.

Step 4: Make the binding

Picture of Make the binding
With wrong sides together make your binding by pressing the strip matching raw edges.

Step 5: Sewing the binding on

Picture of Sewing the binding on
Sew the pressed binding to your quilt top using 1/4" seam allowance and placing the narrow strip against the quilt top. Miter the corners as you would normally do.

Step 6: Finish it up

Picture of Finish it up
front.jpg
back.jpg
frontand back.jpg
Bring the binding around to the back and hand sew down. The seam of the binding should lay right on the edge of the binding. I sometimes press the binding to get a crisp edge before sewing.

Step 7: The final

Picture of The final
back.jpg
frontand back.jpg
I like to use binding clips to help the fabric "remember" the fold.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!