Print PDF
Favorite
Email
Step 10Connect the PCB wires to the switches.
Now is the time to line up your switches just right and to solder wires to them.
Make certain that you are soldering to the terminals that make a connection when the switch is pushed and not the terminals that are connected when the switch is not.
With that said, to one of the terminals solder the wire that routes to the corrsponding pin on "Side A" and to the other terminal solder the wire that routes to the corresponding pin on "Side B."
Do this slowly and carefully with every switch.
Make certain that you are soldering to the terminals that make a connection when the switch is pushed and not the terminals that are connected when the switch is not.
With that said, to one of the terminals solder the wire that routes to the corrsponding pin on "Side A" and to the other terminal solder the wire that routes to the corresponding pin on "Side B."
Do this slowly and carefully with every switch.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
