Print PDF
Favorite
Email
Step 5ID Window
This is an optional step but if you want to have an ID window, read on.
1) Mark out where your ID will sit. Mine's on the left side.
2) Cut out the window. Just cut through 2 layers of Tyvek that make up the front of the card holder pocket (see Folding steps). Don't make this cut too big, you want it be just slightly smaller than an ID card so that there will be some tyvek material around the edges of the ID.
3) Cut a piece of translucent sheet protector that is slightly bigger than the window and slide into the space between the two layers. I used a blue sheet protector here but I think a clear one would probably work best.
1) Mark out where your ID will sit. Mine's on the left side.
2) Cut out the window. Just cut through 2 layers of Tyvek that make up the front of the card holder pocket (see Folding steps). Don't make this cut too big, you want it be just slightly smaller than an ID card so that there will be some tyvek material around the edges of the ID.
3) Cut a piece of translucent sheet protector that is slightly bigger than the window and slide into the space between the two layers. I used a blue sheet protector here but I think a clear one would probably work best.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
