Introduction: UPLOADING CODES IN ARDUINO PRO MINI THROUGH UNO R3

Picture of UPLOADING CODES IN ARDUINO PRO MINI THROUGH UNO R3

Hello, in this tutorial i will show u how to upload code in arduino pro mini through UNO r3 ........

You just need to follow these steps.

Connect as shown in the circuit diagram .

Then :

1- Open Arduino Software in Windows or any other OS you are using.

2- Go to tools.. then go to Board.

3- Select the board as "Arduino Pro or Pro Mini".

4- Upload Code.

5- Done .

Comments

DIY Hacks and How Tos (author)2016-11-20

That looks really easy. A mini microcontroller like this to really come in handy with a lot of my projects.

About This Instructable

164views

3favorites

License:

More by himankverma1:UPLOADING CODES IN ARDUINO PRO MINI THROUGH UNO R3
Add instructable to: