With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Plug and play flag waving ceremony. PC = Patriotic Computer.Related photos and video up here. Check out ni9e.com for more projects.
1 - USB Fan 1 - USB LED lamp 12" of 1.24" diameter heat shrink wrap 1 - Flag (country of your choosing), roughly 9" x 6" 1 - Lighter 1 - Roll of elect...
If you are designing this for a specific computer check the location and orientation of your USB ports. Tape the USB plugs for the fan and lamp togeth...
Bend the lamp and fan arms 90 degrees so as they point at god once plugged into the USB ports. Tape again directly above the bend.
- Cut the longest piece of straight section from a standard wire coat hanger. - Just above the 90 degree bend you taped previously, attach the coat h...
Cut roughly 5" of the heat shrink wrap tubing. Slip it over the lamp, fan, and wire until it rests at the base near the USB plugs. Heat with lighter t...
Plug our flag into the two USB ports in your computer. If you don't love this country enough to spare 2 USB ports then you are in the wrong place. Ben...
Hit the power button and prepare to shed a tear for freedom.
If this isn't patriotic enough for your taste already then you can take it to the next level with some custom desktop and boot up music. First set you...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »