Print PDF
Favorite
Email
Step 3Install
Fold the skinny part over leaving about 2 mm width for lower part of the plug. Insert into plug all the way, and fold the larger part around the flashing.
You can then plug it in and see if it fits. You may need to trim a bit of the paper off depending on your measurements.
It will stay in the USB slot if you do not pull the paper and the plug together.
You can then plug it in and see if it fits. You may need to trim a bit of the paper off depending on your measurements.
It will stay in the USB slot if you do not pull the paper and the plug together.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
