USB Cigar Flash Memory (with LEDs)

Step 1 Needed Stuff

Before you start:

• This project may take more time and effort than one may thinks at first.
• It is not difficult, but it needs patience and skill.

Materials:

• A thick cigar
• An USB flash disk of small dimensions
• Some wire, 2 x LEDs (red!), 1 x 10K resistor
• Wood primer
• Some tape
• A short USB extension cable
• Very thin paper, the size of a stamp

Tools:

• Cutter
• Drill and bits
• X-Acto knives set
• Files
• Soldering iron, solder
• Desolder kit (e.g. desoldering braid)
• Hot melt glue and gun