Instructables
In this instructable I took a USB cable and a old computer fan and made the fan USB compatable.
 
Remove these adsRemove these ads by Signing Up
1-40 of 58Next »
PrncssGeek made it!14 days ago

Made this to help keep my ASUS laptop cool! Thanks for the help! Hooked it up to my cookie cooler stand! :) Geek Chic! LOL

IMG_1862.JPGIMG_1867.JPG
Justin_Bailey3 months ago
Thanks for the idea I'm gonna splice an old pc speaker power supply that plugs in to the wall and attach the fan to it so the fan will get the 8 volts it needs!!!
kkitchell1 year ago
I made a real good fan out of an airsoft machine gun and its wicked. I hooked up two nine volt batteries and its amazing. i even made my own blades out of card board box.
jakobus92 years ago
Héhe, nice during these hot days! thanks for the idea :D
IMG_3431.JPG
If you are doing this. Remember to use a 5 volt computer fan
Kissker3 years ago
As stated, the USB only provides 5 volts power, if you really wanna make it into useful-fan ness, then just splice some battery connectors together out of old toys.

12V = 1x 9v battery clip (which you can buy in bulk for under 0.25 each) or salvage from toys + 2x "AA" battery holder (since most AA are 1.5v each, although rechargable ones vary - so do your math)

Wire em up and add an "On/Off" switch and then encase the whole circuit to make a fully powered, fully recycled (or at least mostly) fully portable fan.


Also make note NOT to mix alkaline based and other based batteries, just because of all the problems and dangers. If you use a alkaline 9v, use alkaline "AA"s as well.
yes, USB only supplies 5v, but you could use a voltage regulator circuit and increase the voltage that way
Hi there!

I'm planning a project using a 12vdc case fan to inflate a plastic bag for a school project.

I have located a 9v battery clip and a 2xAA battery holder and was wondering how i'd go on with wiring them together.

I was also wondering if it was possible to reverse the polarity, thus creating a vacuum effect. If so i'd like to have a 3 prong switch to control the case fan.

I appreciate any help you could provide me. Thanks!
kbwillert2 years ago
I did something similar before seeing this, just spliced an old phone usb cord to the old desktop fan. I bought a tv stand with glass doors and didn't want the xbox to overheat in there, so I cut a hold in the top/back of the stand to put the fan blowing out and plugged it into the xbox. I had figured the xbox usb ports only had power to them when the xbox was on, but I shouldn't have assumed that. But, it will work with my bluray so I'll just make another for the xbox with a master/slave power switch. Fun idea though!
fretted3 years ago
I just built one of these it works great used an old intel fan dc12v 0. 13A startled be when it first came on thought i was gonna jump out of my chair when it hit my pinky but it works well just enough to keep air circulating around my computer while im using it .....

Alex1M64 years ago
(removed by author or community request)
lol 1 9v and 1 aa makes 10.5 v xD
you can safely raise the voltage
you always could try a fan controller.
cgman5 years ago
This works fine when using USB with up to a 9v DC fan. When trying to use the USB port for any12v and up fan, it will not work. I still have not found a way to combine 2 usb ports for these larger fans without causing a short and the PC turning off one of the ports. Any ideas??
Just did this with a 4" PC fan 12V .29Amps and plugged it right into the USB port and it works and spins just fine.
Palalaika cgman4 years ago
if u got 1 fan then im not sure about USB as power source but one 12v fun chills pc very good when useing 12v adapter to power it . I dont think USB fists for 12v fun power source . Best way is to attach 12v adapter with laptop adapter wire and let it be like one wire with has 2 things at the end what can ya put into a wall(thats how i imagine it) xD best way i can tell with my English skills .
wobbler cgman4 years ago
You can't increase the voltage by "stacking" two USBs in series, it will ALWAYS short out the supply, no matter now you do it. The only way to increase the voltage is, as mentioned elsewhere, by using a DC-DC voltage converter, but that seems a little like overkill when you can just use a 12v mains adapter.
chetan_m.p3 years ago
i have made one but it spins too slowly...
this works really great only i used too much usb cable so the fan was underpowered a bit but a really good and easy tutorial
Does the length of the cable also play a part? I used a long cable too. Would I get better result if I used a smaller cable? I do not know the length but I used one of those usb extender cables for this.
shabaki3 years ago
ha i just did this, i need to test a comp fan for aproject and coulndt find any batteries lying around with wenough power :P but i wonder if you spliced a few usbs together...................

BUT if some can get a bunch of these and a nice SMALL power source then i see a rc heli,hovercraft,boat, blimp......need i go on?XD

and anyone know if comp stores might sell old fans for cheap? like a few dollars cheap :P?
Palalaika4 years ago
Hello . Looks interesting :) lego tower cooler :) i pet that the hard part was to build that tower . I bought some cheep cooler http://img20.imageshack.us/i/dsc01702rk.jpg/ 300mm x 240mm with tree 60mm x 60mm coolers witch sucks btw and doesnt do the job even when programming ( when gaming pc turns into oven ( made eggs once :) I didn't find anything better from any shops so now im trying to make one and thats the part where i have alot of questions :( Plan next , i want to supply 2x http://www.arvutikeskus.ee/index.php?pid=0&id=33&menyy_id=33&action=look&lookid=91755 with one 12voltage adapter and question is does they cool less when they have one power source or should i use adapter per Fan ?
harry884 years ago
you could hook to or three usb cords in a parrelel
calikoala4 years ago
USB provides 5volts at 500ma. most fans are 12 volt so there won't be much power to run it very fast.
zkemppel4 years ago
Just did this with a 12v 0.12a computer fan. It spins, but doesn't get very much power from the usb. Fun to make, but rather useless.
vov354 years ago
A wild dc-dc converter ic appears...
I put my laptop on a box fan in my lap. It keeps my pants dry and my computer cool!
I can see, that the case is from an older dell, i had one in my old dell...
ghostsmurf6 years ago
I tried to do that once but it failed miserably because the fan ran on 12v but the usb only gives out 5v
instead of a usb try an old serial cable most computers dont even use that port
modfansal.jpg
There is little to no power that goes through a serial port, even a parallel port. That's just a bad idea you'll fry your motherboard.
DB-25 serial port pin 9 and 10 are reserved for line voltage pin config
on a d-9 (an old serial mouse) the green wire pin 3 to the white wire pin 2 my volt meter is reading 13.4 volts.maybe it needs the controller chip in the serial mouse when the computer is started?
i have a cuecat that plugs into the ps2 mini D-9 keyboard port on MoBo then the keyboard plugs into it the barcode laser lights up where does it get its power from?
Hmm I could be wrong but I often though there wasn't power on either of those ports.
Hycro Punkguyta4 years ago
One could use the old serial/parallel plugs from the older computers, you know--the ones that had the serial mouse, and the serial port and parallel ports plugged into the mobo? Take the wires off of one of those, find a male for it, and wire the female to the +12v rail on your PSU, wire corresponding pins on the male to the fan, and plug that into the computer. Oh, mount the female in it's slot bracket, and put it in an unused PCI slot opening on the back of the case...
I've done this before and found what you said to be quite correct. While the fan will rotate and spin, it won't go anywhere near the fan's maximum RPM. It still works, yeah, but the voltage difference will keep the fan spinning at a much slower rate.
justinacan4 years ago
Now just build a little comppreser and coil and u hav e a minni ac unit
Yvo255 years ago
Great! It's even more interesting if you use old LEGOs (like I did). I made myself a little cooling tower. :)
YOU JUST GAVE ME AN IDEA!
Make the legos into a hollow tower so the fan can fit inside.
take 2-10 fans and place them all inside
Wire them up.
CYCLONE LEGO COOLING TOWER >=D
 I have two fans doubled up ( one in front of another ) and the air flow is wicked, You should make the tower and show us the results!

1-40 of 58Next »