Introduction: USB Flash Drive Case With Sugru

Picture of USB Flash Drive Case With Sugru

Make a new custom case for your USB flash drive.

Step 1: Gather Materials

Picture of Gather Materials

Gather the needed materials.  1 Flash Drive, 1 or more packs of Sugru.

Step 2: Remove Case

Picture of Remove Case

This step is optional.  Remove the case from the existing flash drive.

Step 3: Apply Sugru

Picture of Apply Sugru

Apply Sugru to the flash drive.  Use your imagination and be creative.

Step 4: Your Almost Done

Picture of Your Almost Done

Wait 24 hours or so for your Sugru to drive and then enjoy your freshly decorated flash drive.


VadimS (author)2013-07-21

I just wanted to add a warning, I killed a couple thumb drives this way, sugru is a good insulator, and I think they overheated. You put the sugru a lot thinner, so it'll probably be fine, just a thought.

About This Instructable




More by slackmasterstan:555 Noise MakerUpdate your tweezers with SugruUSB Flash drive case with Sugru
Add instructable to: