Instructables
Picture of USB LED Hotwheels Car
Pimp my Hotwheels Car
 
Remove these adsRemove these ads by Signing Up

Step 4: Prepare the LED

Picture of Prepare the LED
The long leg on the LED is +, so the Resistor should be soldered to this, the shot leg is - or Gnd.
Please ignore the white cable in this Pic it should have been the black one!

Step 5: Solder & clean up

Picture of Solder & clean up
As space is limited inside the car, use a scalpel or file to clean up the solder, unless not like me you are a tidy solderer.

Step 6: Dismantle the Car

Picture of Dismantle the Car
Use a small HSS drill bit in the dremmel to drill out the rivets.

Step 7: Cut out the Spacr for the LED

Picture of Cut out the Spacr for the LED
Every car is Different, just be careful not to cut into the interior.

Step 8: Glue in the LED

Picture of Glue in the LED
Use the hot melt glue to fix the LED in place, using just a little glue at a time, be careful not to glue lower than the Wheels.

Step 9: Ready to Plug In

Picture of Ready to Plug In
Plug in and stand well back!

Step 10: All Done

Picture of All Done
Just switch out the lights!
1-40 of 45Next »
swimmer955 years ago
mine works now i had the wires wrong
Knetjester (author)  swimmer955 years ago
Well done, lets see some pics then ?
i got some pics of mine for led hotwheels car check it out
i know you posted this along time ago so idk if u care
L.E.D. hero4 years ago
Here are mine... i made two. one is a '34 ford an the other is some cheap one that looked cool from target. I used a wire that the ends were stripped and use a 3-volt on it because i was too lazy to find a usb cord. 

(P.S.) macro rocks!
IMG_1009[1].JPGIMG_1007[1].JPG
coundt u just put some watch batteries or whatever was in your headlights tut inside the car to power the undercarriage lights?
if so... Could that work while installing into a die-cast car?
add a memory stick
swimmer955 years ago
mine wont work
Knetjester (author)  swimmer955 years ago
Thats a shame, try harder !
Capt. Fat5 years ago
is it a flash drive?
Knetjester (author)  Capt. Fat5 years ago
No, just a light.
oh. =|
have you gone nuts
Knetjester (author)  hassannaeem1015 years ago
No, I'm nuts to start with!
is there a way to put in a battery and maybe like a switch, so its portable underglow?
see: Battery Free, USB Powered LED Torch
just mod it a bit and put in a usb jack instead so u can charge it with a 2 sided usb plug cable...
I have an intractable like you described comming soon.
I have that same hobby knife set. I got it from the 99 cent store.
i got the same one also for cents but i gave it to my dad and got this one http://www.harborfreight.com/cpi/photos/96500-96599/96551.gif for 5 dollars
Knetjester (author)  masterochicken7 years ago
99 Cents?, I live in the UK & the knife set cost me 1 Pound, looks like I was ripped off!
how much is a pound to a dollar? like 1pound=2 usd ?
yeah.
Mr.NHRA6 years ago
how did you get the body to stay on?
Knetjester (author)  Mr.NHRA6 years ago
Use a hot glue gun, or you could use some tiny self tapping screws, if you have a drill bit small enough to drill out the rivets.
Gh{O}sT Mr.NHRA6 years ago
probly a tiny bit of glue
Knetjester (author) 6 years ago
Thanks for all the comments, I have more projects on the drawing board. Can anybody identify the Landscape in the last picture? Its in the UK!
pai6 years ago
nice
ispiti6 years ago
hey i just bought that, galaxy is it? from target yesterday. sweet
Sweet Custom Lighting!!! I have been customizing Hot Wheels for 10 years, this will make a great new custom idea!!!!
what a gr8 idea!!!
DIY Dave7 years ago
cool
that's male I'm afraid
Knetjester (author)  masterochicken7 years ago
ok, ok, MALE USB plug!!!
sorry for being a dick I was just bored.
I was thinking, I've got an old bluetooth headset lying around I'm sure the battery is small enough to fit inside the car. No need to switch it off, just let the battery die, then recharge. Over all a great Instructable.
power7 years ago
hey.hotwheels made in Malaysia.where did you live???
Clank power7 years ago
i lived in Malaysia !!!!!!!!!!!!!!!!!!!!!!!!! wooohhh hooo
xboxteen017 years ago
you could also build a USB flash drive into the car and use it like that, with the drives LED wired into better LEDS. good instructable though
Knetjester (author)  xboxteen017 years ago
Great idea, unfortunately it is 1:25 am (Don't think my family would appreciate me getting out the Dremmel!) or I would get to work on it right now.#

Watch this space!
Darkshot7 years ago
AWSOME STUFF MAN! and it is a MALE plug not a FEMALE plug it would just be weird to do it with a female but kick butt instructable
1-40 of 45Next »