This is a step by step tutorial on how to build a RFID tag reading USB keyboard using the USnooBie.

This tutorial is provided with the project files. The code files are heavily commented with references to relevant documentation.

Watch the two part videos below to see how to build and code this project. Please watch in full screen at 1280x720p resolution! Go to the direct links to the Youtube video below if you cannot activate HD 1280x720p resolution. There will be coding done on the screen so you need the HD resolution to see the code. The video shown above is only part 1, part 2 is linked below.

Project files: http://frank.circleofcurrent.com/files/usnoobie_rfid_keyboard.zip
Project resources: http://frank.circleofcurrent.com/usnoobie/downloads.php
More info on USnooBie:  http://frank.circleofcurrent.com/usnoobie/

Part 1: http://www.youtube.com/watch?v=IdGpSafJISI

Part 2: http://www.youtube.com/watch?v=poI58P0lQwY

About This Instructable




Bio: I am an electrical engineer. I graduated from U of Waterloo. I used to work for Adafruit Industries as an EE. Now I work for ... More »
More by frank26080115:LED Pocket Watch Easy Cord Wrapping Around Power Bricks Using SMD Components on Breadboards 
Add instructable to: