USB Safe

Step 1 Materials and Supplies

Materials needed:

-Exterior PVC Electrical Box w/ one/two 1/2 inch opening
-3 inches of 1/2 inch PVC pipe (if box has 2 openings)
-1/2 inch cap (if box has 2 openings)
-USB extension cable (I bought mine here)
-Keyed Switch (I bought mine here
-USB flash drive* (must be short. I recommend this)
-4 screws
-PVC box cover
-(optional) Expanding Foam

Tools Needed:
-/Hot Glue Gun
-/Drill
-/Soldering Iron and Solder
-/Wire Strippers

*only if your making a "safe." If your making a usb device lock, you do not need this