Print PDF
Favorite
Email
Step 1Materials and Supplies
Materials needed:
-Exterior PVC Electrical Box w/ one/two 1/2 inch opening
-3 inches of 1/2 inch PVC pipe (if box has 2 openings)
-1/2 inch cap (if box has 2 openings)
-USB extension cable (I bought mine here)
-Keyed Switch (I bought mine here
-USB flash drive* (must be short. I recommend this)
-4 screws
-PVC box cover
-(optional) Expanding Foam
Tools Needed:
-/Hot Glue Gun
-/Drill
-/Soldering Iron and Solder
-/Wire Strippers
*only if your making a "safe." If your making a usb device lock, you do not need this
-Exterior PVC Electrical Box w/ one/two 1/2 inch opening
-3 inches of 1/2 inch PVC pipe (if box has 2 openings)
-1/2 inch cap (if box has 2 openings)
-USB extension cable (I bought mine here)
-Keyed Switch (I bought mine here
-USB flash drive* (must be short. I recommend this)
-4 screws
-PVC box cover
-(optional) Expanding Foam
Tools Needed:
-/Hot Glue Gun
-/Drill
-/Soldering Iron and Solder
-/Wire Strippers
*only if your making a "safe." If your making a usb device lock, you do not need this
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
