Print PDF
Favorite
Email
Step 2Taking apart the Thumb Drive.
Grab some pliers and snips and pull the thumb drive apart.
Instead of grabbing the metal USB circuit board, only pull and snip away at the plastic.
You will get a very small circuit board, and the remaining plastic casing.
You can throw away the old case, since we are building a new one! :D
Instead of grabbing the metal USB circuit board, only pull and snip away at the plastic.
You will get a very small circuit board, and the remaining plastic casing.
You can throw away the old case, since we are building a new one! :D
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
