Print PDF
Favorite
Email
Step 3Attach the drive
Now you have to secure the usb in the case. The way I did this is by rolling up duct tape to pad the walls and hold the usb in place. Then just put a big piece over it all.
When taping, make sure no tape goes outside the walls of the case, otherwise you will never be able to open/close it. When done it should look like the picture.
An alternative would be to hot glue it into place.
When taping, make sure no tape goes outside the walls of the case, otherwise you will never be able to open/close it. When done it should look like the picture.
An alternative would be to hot glue it into place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
