Print PDF
Favorite
Email
Step 5Placing the circuit board
Clean the inner part of the lipstick where you want to glue in the circuit board with ethyl alcohol and a tissue. In my case this was the chrome tube part. If you are going for the twist-out option, you already cleaned the moving part where the grease was situated.
Put the memory stick in place and reassemble the lipstick, if necessary. Do not put on the cap. Now compare with another memory stick how far the USB connector has to stand out and adjust the position accordingly.
Fix the circuit board in place with a few drops of fast drying glue.
Put the memory stick in place and reassemble the lipstick, if necessary. Do not put on the cap. Now compare with another memory stick how far the USB connector has to stand out and adjust the position accordingly.
Fix the circuit board in place with a few drops of fast drying glue.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
