With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is another usb power hack. It demonstrates how to attach a couple usb ports on a DX052 mixer board for powering your ipod(s) or any USB device...
The following equipment can be bought at just about any radioshack or electronics store.Electronics:Soldering Iron2 10K resistorsLM7805 +5V voltage re...
The DX052 comes apart very easily, unscrew the top and disconnect all cables. The cables that connect the mixing controls to the power supply are sock...
You may want to lay this out on a breadboard first. Make sure you connect the pins to the LM7805 in the right order. The pull up resisters for D- a...
There is plenty of room. I conveniently mounted the LM7804 on the ground tap. Strip the USB connector and solder GND, 5v, D- and D+ to it
With a drill bit that can cut through metal make holes for the usb screws and connections, fill them out with a rotozip or dremel. Cut the PC USB PC...
Attach the USB bracket and connect the USB ports.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »