Print PDF
Favorite
Email
Step 2Take apart the DX052 and tap power supply
The DX052 comes apart very easily, unscrew the top and disconnect all cables. The cables that connect the mixing controls to the power supply are socket connections.
With a multi-meter find a connection near the power supply to pull DC voltage. The one I used was 16v. Carefully solder a wire to it to feed the voltage regulator.
With a multi-meter find a connection near the power supply to pull DC voltage. The one I used was 16v. Carefully solder a wire to it to feed the voltage regulator.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
