UV LED Exposure Box

Step 2 Box Parts

First cut out all of the parts as shown in the drawings. I used some salvaged 6mm MDF. Then cut out the holes in the glass lid, the apron and the recesses on the side inserts. And route the recess for the glass using a router cut the surface recess on the underside of the glass lid.

Comments

[farrelan]

Very hard to read your measurements. You have a better pic that you can send me??

[djhamer]

Hi, I found this problem when I first started using Instructables. If you look at the top left hand corner of any image there's a small box with an 'i' in it. If you click on this box you get a page with options to download a higher resolution of the image. Also if you look at step 1 of my instructables there's a zip file containing vector files of the drawings. Its all in common formats so you won't need any additional software to read and print these files.

[farrelan]

Thanks alot. Learn something everyday