Print PDF
Favorite
Email
Step 4Etch & solder the bottom board / Cut acrylic
After etching the bottom board and fixing the components in place you need to cut out the acrylic to size. Be sure to cut out for your standoffs, too.
This doesn't have to be pretty since it's only purpose is to diffuse and fluoresce in the background. In fact, I scuffed it up with some 100 grit sand paper to help diffusion.
This doesn't have to be pretty since it's only purpose is to diffuse and fluoresce in the background. In fact, I scuffed it up with some 100 grit sand paper to help diffusion.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
