Print PDF
Favorite
Email
Step 6Mini Squid
Since I had a few leftover parts and was having too much fun to stop I made a small magnetic "minisquid". This was just a 3" base from Ace Hardware, and I just put a bolt/nut through locline to make the base, you can also buy this part from Locline but they're a little pricey.
The one attachment I really wanted was a soldering iron holder, often when I'm soldering wires together it seems easier to manipulate the wires than the iron, which this is perfect for. I found a leftover piece of 1/2" PVC that worked great for holding my iron snuggly with the power cord. There's not much to explain for this step.
The one attachment I really wanted was a soldering iron holder, often when I'm soldering wires together it seems easier to manipulate the wires than the iron, which this is perfect for. I found a leftover piece of 1/2" PVC that worked great for holding my iron snuggly with the power cord. There's not much to explain for this step.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jul 21, 2010. 9:53 PMhichar
says:
coool....
Reply
 |
Add Comment
|
![Yet another third-hand soldering aid. [with built-in fume extractor]](http://img.instructables.com/files/deriv/FHJ/ADDJ/G9HKED1D/FHJADDJG9HKED1D.SQUARE.jpg)
