Step 7: Attach buttons to buckpuck
hot-glue or silicone
the big switch is the master on-off
the small switches will control the brightness. you only need TWO small switches, three turned out to be overkill.
the big switch is the master on-off
the small switches will control the brightness. you only need TWO small switches, three turned out to be overkill.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
fjguilfoyle says:
Dec 19, 2007. 10:58 AMReply
Can you use epoxy to fit on the buttons?
Visit Our Store »
Go Pro Today »
