Print PDF
Favorite
Email
Step 4Score & Cut the Second Can
This set up is to make the score line on the the second can.
1. Clamp a razor to your workbench 1-1/8" above the surface of the bench.
2. Score the second can just as you did the first.
3. Use a utility knife to make a score line on the inside ring of the bottom of the can.
4. When the score line has weekend the bottom enough you will be able to push the bottom in to the can.
5. Use the clamped razor to carefully puncture the can along the score.
6. Carefully work your thumb in to the puncture as shown in the picture, and slowly work your
way around the can. The can should separate along the score line if it was done properly.
1. Clamp a razor to your workbench 1-1/8" above the surface of the bench.
2. Score the second can just as you did the first.
3. Use a utility knife to make a score line on the inside ring of the bottom of the can.
4. When the score line has weekend the bottom enough you will be able to push the bottom in to the can.
5. Use the clamped razor to carefully puncture the can along the score.
6. Carefully work your thumb in to the puncture as shown in the picture, and slowly work your
way around the can. The can should separate along the score line if it was done properly.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
