Print PDF
Favorite
Email
Step 5Prep the Top Section for Assembly
It is necessary to reduce the diameter of the top section slightly, even though the bottom section was stretched.
1. Cut five or six 1/2" slits in to the side wall of the top section. Space them evenly around the circumference.
2. At the top of each slit use a hole punch to make a relief for the displaced aluminum.
note: the holes are very important. Without them a sharp point will develop and this will spit the bottom section when you try to assemble the stove.
1. Cut five or six 1/2" slits in to the side wall of the top section. Space them evenly around the circumference.
2. At the top of each slit use a hole punch to make a relief for the displaced aluminum.
note: the holes are very important. Without them a sharp point will develop and this will spit the bottom section when you try to assemble the stove.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
