Print PDF
Favorite
Email
Step 6Cut out the ring strip
1. Use a pair of scissors to carefully cut the side wall from one of the leftover cans.
2. Use a strait edge to true up one side with a utility knife.
3. Cut the strip to 1.5" wide. Take care to make the second cut parallel to the first.
4. Trim the 1.5" wide strip to 7"
5. Cut notches in to one side of the strip as shown below.
6. Cut a slit half way across each end so that they may be linked together. See picture for detail.
2. Use a strait edge to true up one side with a utility knife.
3. Cut the strip to 1.5" wide. Take care to make the second cut parallel to the first.
4. Trim the 1.5" wide strip to 7"
5. Cut notches in to one side of the strip as shown below.
6. Cut a slit half way across each end so that they may be linked together. See picture for detail.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
