Step 13: Attaching ears continued
After running the straps through the ears, I used Velcro to affix the ears to the goggles. This ended up being somewhat unstable, but highly adjustable to get them pointed to the right way. Gluing them would have been more permanent, but the Velcro has survived several demos.
The ultrasonic sensor somehow was the perfect fit to be shoved onto the locking mechanism for the flip up capability of the goggles. You have to pull the rubber goggle frame out of the plastic lens piece slightly from the top to make space then the sensor fits right in. The sensor does pop out sometimes, so a little glue could fix it for good. Unfortunately this method of attachment makes it impossible to flip the lenses up anymore.
The ultrasonic sensor somehow was the perfect fit to be shoved onto the locking mechanism for the flip up capability of the goggles. You have to pull the rubber goggle frame out of the plastic lens piece slightly from the top to make space then the sensor fits right in. The sensor does pop out sometimes, so a little glue could fix it for good. Unfortunately this method of attachment makes it impossible to flip the lenses up anymore.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
