Introduction: Ultrasonic Welding- Shower Application

Picture of Ultrasonic Welding- Shower Application

Plastic PE add PS
20khz frequency welder
20psi sealing 20s

Step 1: Setup Fixtures

Picture of Setup Fixtures

Step 2: Set Parameters

Picture of Set Parameters

Energy model 180j
Hold time 0.3
Amplitude 100 50umm

Step 3: Welded

Picture of Welded

Step 4: Testing

Picture of Testing

Sealing the hole, put 20ps to the product. But... Failed

Step 5: Change Parameter

Picture of Change Parameter

Add energy


seamster (author)2014-09-26

Very interesting. Thanks for sharing this!

About This Instructable




More by wntsui:Ultrasonic Welding- Shower Application
Add instructable to: