With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Want a cool, smooth jacket that will get lots of attention? How about one that lights up to music? This video shows the jacket in action m...
Here is the list or materials needed. 1 X Leather Jacket 2 X Speakers (sub-woofers recommended) 1 X Amplifier (optional) link 16-30 ...
Find an old leather jacket you may have lying around; in my case I pulled out the old "Levi's two horse" brand jacket.
Now that you have a jacket it's time to get some speakers. I chose long speakers which used to mount on an old monitor for financial reasons. If I had...
I intended on placing LED's to where it would light up the inner portion of the speakers. To do so I grinded out a notch in the middle of each speaker...
I realized that the speakers I was using had low output volume due to the fact that there is no built in amplifier for it. So I bought a BN9 RAMSEY SU...
These pictures show detailed images of how I made the amplifier.
This is where money directly conflicts with idea. Originally I was going to build my own VU meter using an LM3915 and this schematic: http://www.elekt...
If you haven't noticed right now, sewing is not my thing. So to keep the speakers in place I zip tied the top and bottom, and then hot glued black fab...
You can customize this part to however you wish. To light up the inner portion of the jacket, I decided to use mini pcb boards wired up to 8000mcd bl...
To wire the boards, attach resistors to the negative terminals, and add wire to the positive terminals. Leave both ends open so that you can place the...
The boards plus leds is a cheap alternative to led strips which costs quite a sum of money.
Now for the gluing. Hot glue the two VU meters next to the speakers, and hot glue the led's to the top of the jacket. The led boards should be right u...
Adding the red Ultra bright LED's (they weren't bright at all) is only a matter of hot gluing the LED's in the notch that was made earlier. I did som...
Seeing the spare headphone I had lying on the ground, I decided to do something cool to it. When I was younger I used to put my mouth next to a fan a...
Assembling this was a breeze. All you have to do is cut off the microphone piece on the headset, hot glue the fan on. After hot gluing the fan on, hot...
On testing the alien ware headset, I came up with a problem. The fan did not make the alien sound I was hoping it would; It was too small to produce ...
I was looking for something to enclose the amplifier I built (before I realized the amplifier was garbage) and I found a Yu-Gi-Oh magical dissapering ...
At this point, I was stumped on how to get 12 volts of battery without shelling out 30$ or more. I have never seen anyone use a 9 volt battery + 2 AA ...
Make sure when wiring the batteries together, put the positive on one to the negative on the other. I made the mistake and soldered both positive ter...
I didn't want the led's running continuously and I needed a way to turn the led's on and off. So I decided to put a switch. I used a DPDT (double ...
Now that your jacket is done, the insides should look similar to this picture. This diagram may also help people visualize the placement of wires whi...
Alright, now that the amazing jacket is complete, time to do some testing. Here's the first video I made with the jacket, It was probably the funni...
Remove these ads by
Signing Up
Not NiceInappropriateSpam11,678 views
19 favorites
Posted:
Jun 18, 2011
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »