Under $30 Light Table

Step 7 Plastic Fixins

So now that the table itself was done, It was time to work on the plastic. I didn't like the idea of my light table blinding me so I decided to frost the glass. I took the clear plastic, sprayed it with adhesive, laid down some paper on it and cut off the excess.

Comments

[piemaster89]

I think tracing paper would work just as well if not better since it's more translucent.

[feltonite]

You can also sand the plastic with fine grit sand paper.

[obdan]

White spray paint does the trick much faster and more effectively

[Alostrael444]

You can also buy a spray especially for frosting glass/plastic/acrylic that has many fascinating applications.

[JonH2O]

What kind of paper is ideal?